Some customers to the bag dust collector in the wind pipe requirements just do not leak, the dust dust can be transported to the dust collector, but after the use of the equipment in a period of time, the effect will slowly change, all the time to the basic function of the equipment is lost, in fact, this is wrong, the following and the Guizhou dust collector manufacturers Share how to pay attention to the dust collector in the distribution pipe.
The dust collector should pay attention to the following 4 problems when distributing the air pipe.
1. Whether the wind pipe is sealed or not.
2. The diameter of the wind pipe.
3. According to the installation principle of the field wind pipe.
4. What kind of dust is dusty dust in the duct?
What principles should we follow to choose or judge?
1, the sealing performance of the air pipe of the bag dust collector must be perfected. If the wind pipe can not be sealed, the loss of air volume will appear in the process of transporting the dust, and the effect of the suction will be weakened.
2, the selection of the diameter of the pipe diameter is based on the air volume and the flow velocity inside the pipe. When the dust collector is selected, the air volume is basically constant, but the selection of the flow rate needs to be judged according to what type of dust, if the dust is lighter, the velocity can be relatively slow, if the dust particle size is large, and that is more important than that. The flow rate needs to be quicker to ensure that the dust is not precipitated in the duct.
3. The main principle of installation of the duct is to bend straight and bend. According to the scene, the wind pipe is as much as possible, so it can avoid the loss of wind pressure. In the case of inevitable bend, the curvature of the elbow should be reduced and the loss of wind pressure is reduced as much as possible.